Saturday, March 13, 2010

The Paper Bicycle: Cool and Practical Transportation

Paper Bicycle, Railroad


I had the Paper Bicycle on loan from Adeline Adeline in NYC for several months, and have so many things to say about it that it is hard to organise my thoughts. While the unique look is what drew me to this bike initially, it is the handling that left the biggest impression. I will try to cover all the bases.




The Paper Bicycle is Scottish, designed byNick Lobnitz originally for use by the Royal Mail. Over time, the design moved toward something that could be used by everyone, as an "everyday bicycle." The designer describes it as "relaxed and nimble... a machine that just works every time you need it to, and a journey that leaves you comfortable, clean and refreshed." While it is difficult to glean where the name "Paper Bicycle" came from exactly, to me it makes sense because the bike resembles an elaborate origami creation.




Paper Bicycle, Railroad
The Paper Bicycle's frames are TIG-welded of oversized cromoly steel tubing, handbuilt in Taiwan and finished in Scotland. Notably, the frame has no seat stays and no top tube. Instead, it is reinforced with an elaborate "double chaincase" structure on both the drivetrain and non-drivetrain side.




Paper Bicycle, Construction


The structure is an inherent and multifunctional part of the frame that simultaneously gives it sufficient stiffness, contributes to the low center of gravity, creates a number of convenient spots for locking up the bike, acts as a lifting handle, and of course houses the full chaincase.




Paper Bicycle, Internal Cable Routing
The joints of the frame are smoothly finished, as is the wide unicorn unicrown fork (typo was too funny to remove). The downtube protrudes slightly past the joint with the headtube, and the rear brake cable is routed through it internally, the tube's opening covered with a lid of sorts with a cutout for the cable. I have seen similar tube joints on a couple of other contemporary bicycles (VanMoof's protruding top tube comes to mind), but the Paper Bicycle's design strikes me as the most elegant and harmonious of the bunch.




Paper Bicycle, Railroad

The Paper Bicycle is available in one size only and will fit riders 5' - 6'4". It is designed for 26" wheels with fatSchwalbeBig Apple tires. It comes equipped with front and rear Sturmey Archer(roller) hub brakes, fenders, optional dynamo lighting, and it is available as either a single speed or an 8-speed. A number of powdercoat and chaincase panel options are available and the bike is easily customisable with company logos. For detailed specifications, see here.




Paper Bicycle, Teapot Bell

The handlebars have just enough sweep to them for the hands and wrists to rest naturally, while remaining aggressive and allowing for a great deal of steering control. The diminutive teapot bell works via a trigger mechanism.




Paper Bicycle, Sturmey Archer Brake Levers
The gripping areas are quite long - for me at least a handful and a half each. The rubber grips are finely textured and non-slip. The Sturmey Archer levers provide good leverage and easy to squeeze.





Paper Bicycle, Saddle

I received the bicycle with a sprung vinyl saddle, though I believe other options are available. In environments where the bike is to be shared, the seatpost is quick release.




Paper Bicycle, Chaincase
The spring-activated kickstand is sturdy and resembles a tailpipe when folded.




Paper Bicycle, Pedals

The large platform city pedals incorporate non-slip rubber strips and side reflectors.



Paper Bicycle Rack
An integrated rear rack (dubbed the Starship Rack) will soon be commercially available, and I reviewed the prototype here in detail. The rack plugs into the rear of the chaincase structure, takes less than 5 minutes to install, and is strong enough to support a passenger.




Paper Bicycle Rack
I rode the Paper Bicycle on and off for several months, first without and then with the rear rack. Most of my trips were around town, with a handful of longer distance (20 mile) trips to the suburbs. Overall I probably rode this bicycle for 150 or so miles. The riding position felt immediately comfortable, and remained so over longer distances. The bicycle has no toe overlap.



For some of the time during which the bike was in my possession, I left it outdoors for weeks at a time and observed no adverse effects. The bicycle is intended for all-weather conditions and for outdoor storage.





Paper Bicycle, Low Bottom Bracket

As I adjusted the saddle for my height, the first thing I noticed about this bicycle was the very low bottom bracket. This allows the rider to get full leg extension on the downstroke when pedaling, while also being able to reach the ground while remaining seated - useful in traffic.




Paper Bicycle, Lexington MA
This is how much of my foot I can put down while seated, and still have full leg extension on the downstroke. This aspect of the design makes the bicycle safe and easy to handle in stop-and-go traffic, especially for beginner cyclists.





Paper Bicycle, Lexington MA
When cycling on trails, a low bottom bracket can mean picking up leaves and twigs. Luckily, they cannot get tangled in the chain on this bike, since the chain is fully enclosed. The Paper Bicycle handles well on and off road, and it is remarkably stable. I normally do not ride no-hands, but this is the only bicycle on which I've been able to do so comfortably. At all times, the bike feels as if it is "unfellable" - it just wants to remain upright. I have written here earlier about the emerging breed of city bikes with mountain bike heritage, and the Paper Bicycleis probably my overall favourite among these.





Test Riding the Paper Bicycle

The bicycle I test rode was a single speed, and I was skeptical about how such a massive upright bike would handle without gears in the greater Boston area. It was not a problem, and I am still trying to understand how the 38x17t gearing can feel so versatile. It was low enough for uphill stretches and high enough for downhill stretches - for me at least, it was the perfect fast and easy gear. It is not for proper hills in mountainous terrain, but it is certainly adequate for the types of short hills one is likely to encounter in urban areas, as well as for long but gentle uphill stretches in the countryside. It also does fine in the headwind: The positioning makes it easy to lean low over the handlebars if so desired.




Overall,I did not expect a bicycle this stately and stable to feel so fast on the road and so maneuverable in traffic. And with the 2" balloon tires, the ride quality over potholes was fantastic. Of all the upright city bicycles I've ridden so far, the Paper Bicycle's handling is possibly my favourite.




Of the bikes I've ridden previously, the ride quality of the Paper Bicycle is most comparable to the Urbana and the Pilen. I found it more comfortable over long distances than the former, and faster than the latter.




Paper Bicycle, Railroad

If I try to summarise my thoughts about the Paper Bicycleinto pros and cons, they would be as follows: Positives include its ergonomic comfort, speed, stability, durability, low maintenance, transportation-readiness (full chaincase, fenders, rear rack), and aesthetics. And yes, I do love the aesthetics. The lack of lugs and the unicrown fork don't bother me on this particular bicycle, because they work with the overall design; I honestly find it gorgeous. The biggest potential negative for others is probably the weight (35lb as a single speed with no rack or lighting; more as you add stuff), though personally I do not care as long as the bike moves well for me, which it certainly does.




Paper Bicycle, Internal Cable Routing
What I do care about is the lighting. While dynamo lighting is an option, it is set up like this which to me seems weird considering that the hollow joint in the front of the bike seems to be just begging for an integrated headlight. If Paper Bicyclemade this type of headlight design happen, that would be out of this world.





Paper Bicycle, Handlebars
I will disclose at this point that I seriously considered buying the Paper Bicycle fromAdeline Adelineat the end of my test ride period. The reason I did not, is that ultimately I was not prepared to let go of my current transportation bike which I also love, and I cannot afford to keep both bikes. But happily, the Paper Bicycle remains in my neighbourhood and it is now in the possession of Josh Zisson of Bike Safe Boston - who likes it quite a bit. Josh is looking into doing something clever with the lighting installation, and I am looking forward to seeing what he comes up with.




Paper Bicycle, Railroad

The Paper Bicycle is a cool and practical transportation bike, suitable for beginners and experienced cyclists alike. It is certainly different. But it is worth taking note of for reasons well beyond its visual eccentricities.




My sincere thanks to Adeline Adeline for the opportunity to ride and review this bike, to the designerNick Lobnitz for entrusting me with the rear rack prototype and to the Ride Studio Cafe for receiving and setting up the bicycle. The full set of pictures can be viewed here.

No comments:

Post a Comment