Monday, May 11, 2015

Sky Watchers (Auroras and Perseids and Milky Way, Oh My!)



Just got in from watching and shooting the Milky Way, Northern Lights and Perseid meteor shower from the top of Mt. Maude. What an amazing night! The northern lights were very low along the horizon, but they were dancing and putting on a decent show. Yet again, I am amazed by the wonders of the night sky! This photo shows my friends Jake and April enjoying the amazing sky.

Sunday, May 10, 2015

Pickleball Clinic

When we learned how to play pickleball, we just jumped into the game. We had no idea how to really play beyond the basic rules. Today Rich did a clinic and I realized just how much we didn't know. There was a really good turnout as far as number of people there and the weather was nice enough to be outside which helped. We learned so much! Now we just need to practice it.





You can go here: Florida Picklers to read more and see pictures.

Southeast Aurora


















































Fromthis pastweekend's incredibly awesome geomagnetic storm. You know it's an excellent display of the northern lights when the best views are no longer to the north! This particular formation of the Aurora was actually emanating up from the southeast horizon! This was a 20 second exposure taken at ISO 1600 with a Canon EOS 5D Mark II camera and Canon EF 17-40mm lens.




Friday, May 8, 2015

Touchy-Feely

Susan's Pink Sketchy
I have a funny habit of touching bicycles. It starts innocently enough: First a glance, then a closer look, then a quick stroke or two. But before I know it I am engaged in an orgy of tactile exploration that has been known to shock by-standers. Slowly and affectionately I will run my hand over the frame, tracing the outlines of the lugwork, closely examining the joints, touching the braze-ons one by one, visibly savouring every moment of it. Those who know me in person tease me about this, and apparently even discuss it behind my back good-naturedly. At Interbike last year, I was giving a bike a furtive fondle when the manufacturer snuck up behind me, laughing: "They toldme you were going to do this!"



When it comes to other people's bikes, I do ask permission - much as I would ask for permission to pet someone's dog or cat. "May I?" My voice andmy outstretched handtremble with anticipation. The owner is amused and delighted, if somewhat taken aback by the intensity of my interest.



But though my case may be extreme, I am hardly alone in the bike-fondling affliction. Even without asking, strangers will often stroke my bikes absent-mindedly - their hands drawn to a leather saddle, a headbadge, some shellacked twine, lugwork. "This part here..." an acquaintance suddenly said mid-conversation, pointing to the top of my bike's fork. "It's so... cake-like! What is it for?" Excitedly I began to explain about fork crowns, but stopped myself as the poor person's eyes glazed over. They didn't want to know. But they did want to touch.



I think that bicycles - particularly bicycles with all sorts of interesting or organic-looking bits on them - tend to invite tactile attention. Say what you will about looks mattering or not mattering, but when a bicycle draws us in physically, surely that is a good thing.



Are you touchy-feely when it comes to bikes? Do others tend to touch your bike, and do you mind?

Meal Time

Stormy and Trave eating together.

Thursday, May 7, 2015

Solstice!


Soon the longest day of the year will be upon us. For climbers this is significant not only because there are a lot of festivals, parties and music happenings throughout the area, but also because this is the time of the year when the long daylight hours allow us to climb headlamp free for many, many hours.



This year the actual Solstice is on June 20 at 23:09, however its effects will be noticed for a much longer period of time and are in fact currently being observed. Since the 20th is a weekday you can actually make it to the Fremont Fair and the associated parties going on this weekend, get down, recover and STILL get out in the wilderness or wherever else you enjoy being for the actual day of Solstice. (Just assuming wilderness is your thing since this is a blog about climbing Mount Rainier.)



The forecast for the upcoming week looks like a mixed bag with some sun and clouds, but no major storm events are on the horizon. Hopefully we are done with those for a while. Climbers have recently been summitting via all the standard routes, so check out the updates for the DC, Emmons, and Liberty Ridge among others. Don't forget your sunblock and stay hydrated out there!

Tuesday, May 5, 2015

Be attentive when placing ice screws!

A Grivel Helix buried with some terrain protection..but it wasn't an intentional act.And until now I hadn't thought much about the issue. I wonder how many of us have?









The German DAV report and its pictures discussed in this entryare clear as to the issue but sadly I can't copythe context. If anyone finds a version I can copy and paste [thank you Joe for the jpegs]please let me know.







This from Magnus Råström @ Black Diamond Equipment AG





"There was a ice climbing accident last season, no one got hurt but it could have ended really bad and the ice climbers were using our (BD) Express screws. Christ Semmel working for DAV investigated the accident and attached is his report in German. I have below a short summary in English.



Course of Action:

2 Ice climbers doing a multipitch route in Austria, using Mammut double ropes, for protection BD Express Ice Screw with a Austria Alpin QD Easy Classic and for belay a reverso. The axe and crampons of the lead climber (belayed from below) did pull out and the climber fell 12 m without ice contact or injury, but the mantel ripped on one of the ropes (see photo page one, blue rope). Chris came to the conclusion that the rope ripped because it was pulled over the crank knob of the ice screw. The photo on page one, red rope is the rope which they have tested and pulled over a crank knob. Chris is not negative against our ice screw’s and the conclusion is that when ice climbing with ice screw’s with crank knobs it is important to fold them in after use. Also he recommends the use of ice screws with crank knobs that you can fold in.



All the best,

Magnus Råström / Black Diamond Equipment AG"





I use and like both the BD Express and Grivel Helix.



I do how ever use Grivel Helix in much of my own steep water ice climbing with an obvious crank knob that does not fold in. Worth noting the BD knobs are sharp in comparison. It should be pretty obvious you don't want a rope running over them that will take weight. The BD knob diameter at the small end is 9.5mm and the Grivel 15.5mm. The Grivel knob is a synthetic, likely Delrin and smooth. BD's knob is knurled aluminum and likely the last thing any of us want to run a rope over. I don't want my rope running overeither in a fall. But if given a choice...I'll take a folded knob overthe Grivel option.



But that isn't the total story. You need to know more.



The direction at which you clip the hangers should also be very different on the BD as opposed to the Grivel screws. The Grivel hanger offers a bit more play to set a screw and have the hanger flex on the screw to clear the ice. That allows the Grivel knob to be closer to the ice where the BD hanger will always be forced intentionally to the outside. Flip the BD knob down and you won't have a problem there. Not so on the Grivel as you have no option but to hide the know in the terrain. .



I disagree some what withMagnus' synopsis of the report and if that was accurate (and no reason to think it was not) the DAV report itself.



Here is why:

It you hang a rope on the Grivel hangerit is more likely to do one of two things in my opinon :

One: It will slide off to the outside of the hanger on theslick Delrin material



Two: Or depending on the hanger clearance from the ice get trapped behind the hanger and run on the 16.5mm screw body itself and or the horizontally positioned hanger body.



Either option I would prefer to knurled aluminum and a vertical positioned 2.5mm thick stainless hanger. So close your knobs on the BD Express screws! And I wouldn't usescrews with a fixed small diameter (knurled or not) knob that mimics BD's hanger design is what I take away fromthis. It is splitting hairs but important hairs I think.



It is all about the details,be careful out there!



A Grivel Helix with the black knob and two BD Express, red knob up and the yellow knob tucked in. Note the Grivel hanger is reversed compared to how it would actually be placed in the ice for this photo.



Obvious difference in the Grivel horizontal hanger and BD's vertical hanger. Thisis not the position the Grivel screw would normally be placed but 180 degrees reversed. Knob up on Grivel. Knob down for BD.



A long 2.7mm "blade" before you get to the knurled aluminum knob on the BD screw.



Beal 7.8 Ice twin on the BD knob which when left open caused a sheath failure in the fall.





I have no doubt you could catch a rope on the Grivel hanger, which you really do not want to do.Bottom line is be careful out there and think about each and every placement. For my money twin or dbl ropes on ice make a lot of sense.







Two pictures of the Grivel Helix in the position a rope would normally be caught from above. With the hanger totally at the end of its movement and the carabiner holeis to the inside,the knob is angled down so a rope would generally just slip off of it orthe rope will run behind the hanger and on to the screw tube body. This seems an unlikely event (but certainly possible) because only ice behind the knob end of the hanger would force it into this position.



If the hanger does have space behind it after the screw is placed no question you can easily hook the rope there in a fall.But again better a 17.5mm radius (Grivel's tube) to run your rope over than a 9.5mm radius (BD's knob) with the addition of several sharp edges to help the damage along.



Worth repeating I think.

For my money twin or dbl ropes on ice make a lot of sense.

Miles of vertical ice have been climbed with either style screw and hanger and as many miles with screws and hangersnot nearly as good. I'll continue to climb on both BD and Grivel screws and choose accordingly to whichfits my project best.I'm not suggesting panic here just that you keep your eyes and mind open to the possibilities.