The Pashley Princess as Winter Bike

In several posts now I have expressed my frustrations with winter cycling and my disappointment over not riding as much as I did during warmer months. But today I realised that winter is more than halfway through already, and I have been cycling all along. Not as much as in the Summer and Fall, but cycling none the less. So it's not so bad, really. Not because I am becoming more brave or skillful, but simply because it doesn't snow all the time and the temperature isn't always below 30°F. On some days it is even enjoyable again.

Since mid December I have been riding my Pashley Princess exclusively. Initially I considered getting a "beater bike" for the winter, but came to the conclusion that I should just stick with the Pashley. It was definitely the right decision.

I don't need a winter bike, because the Pashley Princess Sovereign is a winter bike. For one thing, everything on it was designed to withstand the elements: The fenders, internal gear hub, fully enclosed chaincase, enclosed hub brakes, dynamo-powered lighting, extremely durable powdercoat and rustproof components make her essentially a zero-maintenance bike in winter weather conditions. I know that some feel the Princess is "too pretty" to ride in the winter, but the prettiness in no way detracts from her toughness and utility. It simply does not make sense to get a sub-par winter bike because you think your bicycle is too attractive to be used the way it was designed to be used.

The other major benefit or riding a Pashley Princess in winter, is its incredible stability and indifference to weather conditions. I had noted this several times when riding in the rain, and it is also true in slushy winter weather. I am trying to put my finger on what feels so good about this bike in bad weather. It is probably the combination of the heavy frame, stable handling, wide tires and enclosed brakes that makes it feel just so wonderfully stable where other bikes don't. I can ride this bike through a flooded road and corner at close to normal speed, and it will behave the same as on a dry road. It's pretty amazing and certainly helps in winter, when there is either slush or lake-like puddles from melted snow everywhere.

Pashley's platform pedals interact well with all of my winter boots and I have not had to worry about slipping.

And my trusty Carradice Barley saddlebag has proven itself to be completely rain and snow proof even in the nastiest weather. All in all, I cannot think of a nicer winter setup: I simply ride the Pashley and don't worry about a thing other than watching out for sudden chunks of hard snow on the road.

Speaking of obstacles on the road, here is a stunner I experienced cycling home at dusk yesterday. On one of the side streets near my house the asphalt cracked so much that it formed a "step" in the middle of the road, with 8+ inches of elevation change. If you are coming from the direction this picture was taken, you can see the rise as you approach. But coming from the opposite direction (as I was last night) you really cannot see the drop that awaits you; it just looks like a regular crack. So I basically launched my Pashley into the air by riding straight over this crater at full speed. I am glad to report that the bike handled it fine. It landed hard, but was very stable, and just kept going as if nothing happened. I did stop to check the tires and rims afterward (as well as take some pictures, in disbelief that such a thing could have formed right in the middle of the road overnight), and everything is perfectly fine. I wonder how other bikes would have fared under the same conditions.

Having ridden the Pashley Princess in both warm months and cold, I can say that she is really at her best in poor weather conditions. I can think of few other bikes that are so well suited for the title of "winter bike". And if she is beautiful to boot? Well, I won't hold that against her!

Native Clematis

This is a California native clematis, Clematis lasiantha.

Camp Patriot Climb

The motto for Camp Patriot, “giving back to those that have given” effectively states their mission: to provide disabled veterans opportunities to continue enjoying outdoor adventures. In this spirit, three disabled veterans were chosen to join professional climbing guides on a summit climb of Mount Rainier, a challenge that many climbers without any physical obstacles find difficult.

The three participating climbers, Ryan Job, Chad Jukes and Joey Martinez, all served in the military and are disabled as a result of injuries sustained during a tour of duty oversees defending our country. Each was chosen because of their unwavering commitment to service, their strength, courage, and dedication to continue living active and fulfilling lives despite past injury. Camp Patriot commemorates these exceptional men and in the process provides this experience of a lifetime.
The attached photo was taken on the last day of Camp, Sunday July 10th, when two F15's from the 173rdFW out of Klamath Falls, OR, flew overhead Camp Muir at precisely 8:00 a.m. to celebrate this extraordinary climb. For more information about Camp Patriot and the Mount Rainier climb, see a recent front page article posted in the Seattle Times or check their website.

Derailleur Adjustment: an Illustrated Guide

Thank you once again everybody for the advice on how to adjust a derailleur. I am pleased to announce, that with your help, it is done.

To recap the problem I was having: When downshifting to the lowest gear, there was nothing stopping the chain from going past it and slipping off the cog. Here is how we corrected this:

Mechanic

Assistant Mechanic

The all-important tool

The derailleur. This is a rear SunTour Vx derailleur from the late 1970s. Note the two screws on the left.

A side view of the screws.

And here they are close up. Notice the letters "L" and "H" next to the screws. The "L" indicates low gear (the largest cog). The "H" indicates high gear (smallest cog). To stop the chain from going past the largest cog when downshifting into the lowest gear, tighten the "L" screw.

Here is the screw, being tightened. Conversely, if you find that the chain does not travel sufficiently to reach the largest cog when shifting to your lowest gear, you need to loosen this screw a bit. And if you are having this problem when upshifting to the highest gear, simply do the same thing to the "H" screw.

A close-up of the procedure. This takes very little time.

After the adjustment, test the derailleur: first by manually spinning the pedals as you shift, then by test-riding the bike.

Here I am, having happily shifted into the lowest gear without the chain coming off.

All done, and ready for the steepest hills. A big Thank You again to dukiebiddle, cyclemaniac, somervillain, and all the others who kindly offered advice and posted links. Your support is very much appreciated.

Some classic derailleur adjustment instructions, using more conventional tools:
. Sheldon Brown's thorough article on "derailler" adjustment
. The Bicycle Tutor's instructions and video

Quiros City Bike: a Boston Classic

Co-Habitant's friend Erik recently had a frame made by local builder Armando Quiros. I watched the bike being assembled and had the chance to photograph it upon completion. This bike is interesting to me, in that it epitomises the Boston aesthetic of making transportation bicycles with tight, aggressive geometry, yet upright positioning and accessorised for the city. In fact Armando calls this a "city track commuter." It is also interesting, because increasingly I enjoy looking at fillet-brazed frames and this one is a nice example.






One of the young new names that have become prominent over the past couple of years, Quiros Custom Frames are based in Natick, MA and offer a variety of lugged and fillet brazed options.







I met Armando a few years back, when Royal H.and Icarus still had their studios in Somerville, and all sorts of interesting bikey people would stop by that part of town. Later I snapped this photo of him receiving a trophy at the Larz Anderson show, where one of his bicycles won an award. Not bad!






Quiros frames can be recognised by the prominent gothic headbadge






and by the "787" painted above the bottom bracket - the area code for Puerto Rico.






Erik's frame is fillet brazed, using Columbus tubing.






What I like about this method is the seamless, almost liquid look to the construction. The brazed sloping fork crown goes nicely with this.






The British Racing Green paint, silver components, hammered fenders and caramel-brown accessories create a classic, distinguished aesthetic. At the same time, the narrow riser bars and track geometry give the bike a contemporary "fixie" look. It's an interesting and somewhat unexpected combination. Looking at the bike, my mind's eye keeps trying to either replace the cork grips with hot pink rubber ones, or else change the bars to North Roads. But I think the marriage of styles is ultimately what makes this bicycle unique to the owner.





The bicycle is built up witha Phil Wood hub wheelset, an IRD crankset, Tektro brakes, MKS Stream pedals, straight Thomson seatpost, Brooks saddle, and Honjo hammered fenders. Erik rides it as a fixed gear single speed.





The idea behind building a city bike with track geometry is that it is quick handling and responsive in traffic. While personally I cannot handle the tight clearances on a bike like this, I understand the concept and this is certainly a successful execution of it. The bicycle looks very much at home on the streets of Cambridge, and the owner enjoys the ride. Many thanks to Erik and Armando for the opportunity to document this bicycle. More pictures here.

Acadia :: Jordan Pond and The Bubbles

A visit to Acadia National Park is not considered complete unless you take in Jordan Pond and 'the Bubbles' which dominate the view on the northern end.



We walked along the southern shore on Thursday (September 13th) on our way to one of the carriage roads and again on Saturday (September 15th) while waiting for our scheduled carriage ride.



The two days could not have been much different - Thursday was a beautiful day with deep blue skies and lots of sunshine while Saturday was cloudy and overcast with the threat of rain looming over us.






Thursday. September 13th.





Saturday. September 15th.





Thursday. September 13th.





Saturday. September 15th.

CUBA here I come!

So, flying tomorrow morning to the Caribbean, to Cuba. It is going to be a long flight.


This trip just came in at the right time. I badly need a longer break right now. Seriously. I need to relax and think of NOTHING. Yes, think of nothing. Ahhh, that sounds so peaceful. No stress at all.

I am also tired of the cold weather here.

Nevertheless, I will be back in the Netherlands at the end of the month but will be blogging during the trip when able.